A GSTR-1 amendment reports a correction to a document you already filed: xMatix compares what a filed return reported with your books now, and carries each accepted difference into a later, unfiled return as an amendment in Table 9A, 9C or 10. A filed GSTR-1 is frozen, so it cannot be processed again. When you correct an invoice or note from a filed month, the correction reaches GSTN only through an amendment in a later month. That return then reports the whole revised document, and only the difference adds to what you owe.
Overview
All the amendment work happens on the Amendments tab of a GSTR-1 record. It is the third inner tab of GSTR1 Statement & Reconciliation, after Overview and Reconciliations.
- On a filed return, the tab compares what the return filed with your books (Suggest amendments). It also lets you raise an amendment by hand (Amend a document) and lists the amendments raised against the return.
- On an unfiled return, the tab lists the amendments of earlier returns that this return carries.
GSTN has one amendment section for each table, and xMatix builds all six:
| Section | What it amends | Where it shows on the Overview |
|---|---|---|
| B2BA | A B2B invoice (Table 4), including SEZ and deemed-export invoices | 9A: B2B Regular, B2B Reverse Charge, SEZ or Deemed Exports, by the invoice's type |
| B2CLA | A B2C Large invoice (Table 5) | 9A: B2CL (Large) |
| EXPA | An export invoice (Table 6A) | 9A: Exports |
| CDNRA | A credit or debit note to a registered buyer | 9C: Credit / Debit Notes (Registered) |
| CDNURA | A credit or debit note to an unregistered buyer | 9C: Credit / Debit Notes (Unregistered) |
| B2CSA | One place of supply's B2C Small totals for a month (Table 7) | 10: B2C (Others) |
An amendment moves through three statuses:
- Pending: accepted on the filed return, and not yet in a later return.
- Draft: taken into a later, unfiled return, which now carries it.
- Filed: the carrying return was filed. A filed amendment is frozen like the return.
When to use it
Use it when a document from a month you have already filed has changed in your books, or was reported wrongly:
- the rate, taxable value or tax on an invoice was wrong, and you have corrected and re-posted the invoice;
- the invoice date, number or place of supply was wrong;
- the customer's GSTIN was wrong on the filed invoice;
- an export's shipping bill number, shipping bill date, port code or export type was wrong;
- the B2C Small total for a place of supply changed after filing.
Many value errors on an invoice are better corrected with a credit or debit note in the current month. The note is reported in that month's Table 9B and does not touch the filed invoice. Use an amendment when the filed document itself must change.
How xMatix handles it
- The comparison reads your tax lines. For each document the filed return reported, Suggest amendments compares the version GSTN holds now with the document's tax lines in your books now. The version GSTN holds is the filed row, or its latest filed amendment if it has one. The tax lines are read whatever their date, so a corrected date shows up too. Amounts agree when they are within ₹1.
- What is compared. The fields are the table, Customer GSTIN, Number, Date and Rate. Place of supply is compared for B2B, B2C Large, B2C Small and notes. Export type, Shipping bill, Shipping bill date and Port are compared for exports. Invoice type and Reverse charge are compared for B2B, and Note type for notes. Taxable value, IGST, CGST, SGST/UTGST and Cess are compared rate by rate.
- Cancelled and re-created documents. A filed document may have no tax lines any more while a new document in the same month has the same number and customer GSTIN (and, for a note, the same note type). xMatix treats the new document as the replacement and compares it with what was filed.
- B2C Small is amended per place of supply. Table 7 is filed as totals, so B2CSA compares, for each place of supply, the filed totals with what your books now put into B2C Small for that place. That includes the unregistered credit and debit notes netted into it. B2CSA can only be suggested, never raised by hand.
- The amendment carries the whole revised document. It stores the original number, date and period, the revised details and rate lines, and the differential for each tax head.
- Differentials are signed by liability. For an invoice or debit note, the differential is revised minus original. For a credit note it is the other way round, because a larger credit note means less tax owed. A positive differential always adds to what the carrying return owes.
- The earliest open return carries it. When you process a GSTR-1, it takes in every Pending amendment for the same GSTIN whose original month is earlier, provided it is the earliest unfiled GSTR-1 after that month. A later month that you process first takes in nothing.
- Processing keeps suggested amendments current. Each time the carrying return is processed, xMatix compares every Draft amendment that came from Suggest amendments with your books again. If a difference remains, the amendment is updated. If your books now agree with what was filed, it is removed. Amendments raised by hand with Amend a document are never changed by processing.
- Filing freezes them. Filing the carrying return, by either filing path, turns its Draft amendments into Filed. A later Suggest amendments on the original return compares against the filed amendment, so a second correction becomes an amendment of the amendment.
- The deadline. A document can be amended up to the GSTR-1 for November after the end of its financial year. For example, an August 2026 document (financial year 2026-27) can be amended up to the November 2027 return. Accepting or raising an amendment is refused after that return's due date, 11 December 2027 in this example. The date is counted on the Indian calendar. The tab shows the date as "Amendments of this period can be filed until …".
Prerequisites
- The original GSTR-1 has the Status Filed, and has a GSTIN and a GST Fiscal Period.
- A later GSTR-1 for the same GSTIN that is not filed yet, to carry the amendment. GST return provisioning creates one every month (see The GST console).
- The corrected document's tax lines are up to date. A sales invoice's tax lines are recorded when it is posted with Post General Ledger, so post a corrected invoice again with Post General Ledger. Saving the invoice does not refresh them. A credit note's tax lines are refreshed each time the approved note is saved. See Tax transactions.
- The amendment actions are set up for your organisation and granted to you (see Permissions). Otherwise the tab only says "Amendment actions are not set up for this organisation yet."
Procedure
Step 1 — Open the filed return
Open the GST console (Tax Center → GST Console), choose the GSTIN and the month of the document you corrected, and click the GSTR-1 card. Check that the Status is Filed. Open GSTR1 Statement & Reconciliation, then the Amendments tab.
The tab has two parts: Suggested amendments, with the buttons, and Amendments, the amendments already raised against this return.
Step 2 — Suggest amendments
Click Suggest amendments. xMatix compares each filed document with your books and lists every one that differs. The list has these columns:
- Document: the filed number and date, and the section (B2CSA rows show POS and the state code instead of a number);
- Outcome;
- What changed (filed → books): each field that differs, with the filed value and your books value;
- Taxable differential and Tax differential.
| Outcome | Meaning | Can you accept it? |
|---|---|---|
| To amend | The difference can be reported as an amendment | Yes |
| Cancelled | The document has no tax lines any more, and no replacement was found | No. Issue a credit note (or, for a note, a fresh note) to reverse it, or amend it to zero on the portal |
| Needs attention | The document now belongs in another table (for example a customer GSTIN was added, moving it between B2B and B2C), or a B2C Large invoice's place of supply changed | No. Correct it by hand on the GST portal |
| Past deadline | The original month is past its amendment deadline | No |
| Not built | The comparison could not place the document in an amendment table | No. Correct it on the GST portal |
A row that already has an amendment says "Already pending — accepting again updates it." (or "Already draft —"). If nothing differs, the list says "The books agree with what was filed. Nothing to amend. If a document was corrected outside the books, use Amend a document."
When a place of supply moved tax between IGST and CGST + SGST, the row also says "The tax moved between IGST and CGST + SGST. The head paid in error is a refund claim (s.77), which xMatix does not raise."
After a change in your books, click Compare again to refresh the list.
Step 3 — Accept the suggestions
Tick the To amend rows you agree with. Rows with any other outcome cannot be ticked. Click Accept (n).
In the Accept n amendments dialog, enter a Reason (required, up to 500 characters), for example "Wrong tax group on the item", and click Accept.
xMatix runs the comparison again at that moment, so it records what your books say now, not what the screen showed earlier. Each accepted row becomes a Pending amendment and appears in the Amendments list. A document that already has a Pending or Draft amendment gets that amendment updated, not a second one.
Step 4 — Raise an amendment by hand (when the books cannot show the fix)
Use Amend a document when the correction is not in your books. Examples are a customer GSTIN that was wrong on the filed invoice but is correct only on the account now, or an export's shipping bill details.
- Click Amend a document.
- In Document this return filed, search by number, customer GSTIN or value and pick the document. The list holds the B2B, B2C Large, export and note documents the return filed, in their latest filed state. An already amended document is marked "amended".
- Fill in only what was wrong. Everything you leave blank stays as filed:
- Correct customer GSTIN (B2B invoices and registered notes only);
- Correct number and Correct date;
- Correct place of supply (state code) (not for exports or B2C Large invoices);
- for exports: Export type (WPAY — with payment of IGST, or WOPAY — without payment (LUT / bond)), Correct shipping bill number, Correct shipping bill date and Correct port code.
- Enter a Reason and click Raise amendment.
The dialog has no fields for rates or amounts. An amendment raised by hand keeps the filed values, so its differential is zero. To amend values, correct the document in your books and use Suggest amendments. The new amendment is Pending, and processing never refreshes it from your books.
Step 5 — Process the next open return
Open the earliest GSTR-1 for the same GSTIN after the original month that is not filed. A banner above the tabs reads, for example, "2 amendments pending from Aug 2026", with "Process this return to take them in". Click View to open its Amendments tab.
Click Process GSTR1. The Pending amendments become Draft amendments of this return. On the Overview, each amended table shows two lines:
- Amended amount - Total: the revised documents, with their count;
- Net differential amount (Amended - Original), or for notes Net Differential amount (Net Amended Debit notes - Net Amended Credit notes) - Total.
Click a line to open the amendments behind it. Total Liability (Outward supplies other than Reverse charge) adds the net differentials, except those of reverse-charge B2B invoices and reverse-charge registered notes. The return's GSTR-3B adds the same differentials to Table 3.1 (see GSTR-3B).
Step 6 — Move or delete an amendment if needed
In the Amendments list of either return, a Pending or Draft amendment has two links:
- Move opens Move …. Pick another GSTR-1 of the same GSTIN that is not filed and is later than the original month, then click Move. The amendment becomes a Draft of that return. Use it when the amendment belongs in a different month, or when the return that should carry it was processed out of order.
- Delete removes the amendment and its rate lines. If your books still differ, Suggest amendments will offer it again.
A Filed amendment has neither link.
Step 7 — Check it on the Reconciliations tab
The carrying return's Reconciliations tab lists each amendment it carries alongside the documents. Pull from GSTIN does not import GSTN's amendment sections, so an amendment always reads Missing in GSTN. Ignore on an amendment row takes it out of the return's figures. Carry Forward is refused on an amendment; use Move instead.
Step 8 — Report the amendments to GSTN and file
Save to GSTN does not send amendments. It sends the return's own tables only. Enter each amendment in Tables 9A, 9C and 10 on the GST portal, using the revised details and the Amended amount and differential lines from the Overview. Then file the return as usual (see GSTR-1, Step 8). When the return is Filed, its Draft amendments become Filed.
Fields
An amendment is a GSTR-1 Amendment record. The Amendments tab shows the main fields; open a line on the Overview for the rest.
| Field | What it means | Notes |
|---|---|---|
| Name | The amendment's reference | Numbered from the AMD series when created, for example AMD-05112026-000001 |
| Section | The GSTN amendment section | B2BA, B2CLA, EXPA, CDNRA, CDNURA or B2CSA |
| Status | Where the amendment stands | Pending, Draft or Filed, set by xMatix (see Overview) |
| Origin | How it was raised | Books (from Suggest amendments, kept current by processing) or Manual (from Amend a document) |
| GSTR-1 Header | The later return that carries it | Empty while Pending |
| Original GSTR-1 | The filed return it amends | |
| Original Number, Original Date, Original Period | The document as GSTN knows it | Original Period is MMYYYY. For B2CSA the number and date are empty |
| Original GSTIN, Original Place of Supply, Original Value | The filed customer GSTIN, place of supply and value | |
| Revised Number, Revised Date, Revised GSTIN, Revised Place of Supply, Revised Value | The document as it should be | Revised Value is the taxable value plus every tax head. The revised rate lines are stored under the amendment |
| Invoice Type, Reverse Charge | B2BA only | Decide which 9A line it shows on |
| Note Type | CDNRA and CDNURA | Credit or Debit |
| Export Type, Shipping Bill Number, Shipping Bill Date, Port | EXPA only | Your books hold no shipping bill, so a suggested EXPA keeps the filed ones |
| Differential Taxable, Differential IGST, Differential CGST, Differential SGST/UTGST, Differential Cess | The change in what the return owes, per head | Signed by liability: a positive figure adds to the liability |
| Ignored | Set by Ignore on the Reconciliations tab | An ignored amendment is left out of the Overview and Total Liability |
| Reason | Why it was raised | Required when you accept or raise one |
Business rules
- Filed returns only. Suggest amendments, Accept and Amend a document work only on a Filed return. On any other return they are refused with "… works on a filed GSTR-1 only. Until a return is filed, correct the books and process it again." A return with no GSTIN or period is refused with "Set the return's GSTIN and period first."
- One open amendment per document. Accepting or amending a document that already has a Pending or Draft amendment updates that amendment.
- Flags cannot be accepted. A cancelled document, a document that changed table, a B2C Large place-of-supply change and a document past its deadline are shown but cannot be accepted. B2CLA keeps the original place of supply, so the fix is to amend the invoice to zero and report it afresh on the portal.
- Adoption order. Only the earliest unfiled return after the original month takes in a Pending amendment, and only if that return is not later than the November deadline return. A Pending amendment whose earliest open return is past the deadline is not taken in.
- Move limits. The target must be a GSTR-1 of the same GSTIN, not filed, later than the original month and not later than the deadline return.
- Filed is final. A Filed amendment cannot be moved, deleted or changed. To correct it, amend the document again from the original return.
- Reconciliation. Amendments are paired with GSTN's copy by section and identity (revised customer GSTIN and the original and revised numbers; the place of supply for B2CLA; the original month and place of supply for B2CSA). Because GSTN's amendment sections are not pulled, there is no GSTN copy to pair with today.
- GSTR-3B. Process GSTR3B adds the differentials of the Draft and Filed amendments the same-month GSTR-1 carries, leaving out ignored ones. EXPA, and B2BA on SEZ invoices, go to 3.1(b). The others go to 3.1(a).
Example
A distributor with GSTIN 27ABCDE1234F1Z5 filed its August 2026 GSTR-1 on 10 September and its September return on 10 October.
- On 20 October the accountant finds that invoice INV/26-27/0412 of 14 August was billed at 12% instead of 18% to a registered buyer. Its taxable value is ₹50,000.00. They correct the line's tax group, post the invoice again with Post General Ledger and issue the extra tax to the customer.
- They open the August GSTR-1 (Filed), go to Amendments and click Suggest amendments. One row reads To amend · B2BA, with "Rate: 12% → 18%" and a tax differential of ₹3,000.00.
- They tick it, click Accept (1), enter the reason "Wrong tax group on the item" and click Accept. The amendment is Pending.
- The October GSTR-1, the earliest unfiled return, shows "1 amendment pending from Aug 2026". They click Process GSTR1. The amendment is now Draft, and Amendments (9A) - B2B Regular shows Amended amount ₹59,000.00 and Net differential ₹3,000.00 of tax. Total Liability is ₹3,000.00 higher.
- Before filing, they enter the B2BA on the GST portal with the original number and date and the revised values, then file. The October return and its amendment become Filed.
Training
Practice exercise
In a sandbox where the amendment actions are set up, with a filed GSTR-1 for one month and an unfiled return for the next:
- Pick a B2B invoice from the filed month. Change one line's tax group to another rate and post the invoice again with Post General Ledger.
- On the filed return, open Amendments and click Suggest amendments.
- Accept the B2BA row with a reason.
- Open the next month's return and click Process GSTR1.
Expected result: the suggestion shows the old and new rate. After Accept, the amendment is Pending. The next return shows the pending banner, and after processing the amendment is Draft. Amendments (9A) - B2B Regular shows the revised invoice, and the net differential equals the change in tax. Then click Delete on the amendment, process again, and confirm that the 9A lines return to zero.
Quick reference
- A filed GSTR-1 never changes; corrections go into a later return as amendments.
- Work on the filed return's Amendments tab: Suggest amendments, tick, Accept with a reason.
- Amend a document fixes details the books cannot show (GSTIN, number, date, place of supply, shipping bill); it never changes amounts.
- The earliest unfiled return after the original month takes Pending amendments in when you process it.
- Only the net differential adds to Total Liability and to GSTR-3B.
- Move or Delete works only on Pending and Draft amendments.
- Save to GSTN does not send amendments; enter them on the portal before filing.
- Deadline: the November return after the end of the document's financial year.
Permissions
The five amendment buttons are GSTR1 server actions:
| Button | Server action |
|---|---|
| Suggest amendments, Compare again (also lists documents for Amend a document) | SuggestAmendments |
| Accept | AcceptAmendments |
| Amend a document | Amend |
| Move | MoveAmendment |
| Delete | DeleteAmendment |
These actions are not part of the standard GSTR1 setup. A button appears only when the GSTR1 entity has its action. If Suggest amendments is missing, the tab shows "Amendment actions are not set up for this organisation yet." Each action must also be granted to the user's security profile, like the other GSTR1 actions. Grant them only to the profile that files GST returns. The Amendments list reads GSTR-1 Amendment records, so the profile also needs read access to that entity. Without it, the list stays empty.
Configuration
- Add the actions. In Setup → Design Studio → Entities → GSTR1 → Logic → Actions, add five server actions. Give each the same name and Server Action Name:
SuggestAmendments,AcceptAmendments,Amend,MoveAmendmentandDeleteAmendment. The tab places the buttons itself, so they do not need to go on the page header. Then grant them on the GST filing profile. See Entity behaviour — Actions. - Entity access. When the GSTR-1 Amendment entity was added to your organisation, every security profile that already had access to GSTR1 was given the same access to GSTR-1 Amendment. A profile created or given GSTR1 access after that does not get it automatically. On such a profile, add GSTR-1 Amendment at the same level as GSTR1.
- Where the records live. GSTR-1 Amendment is in no app menu and has no form of its own. You work with it on the Amendments tab and through the Overview drill-down. It has one list view, All GSTR-1 amendments, which reports and filters can use. The view shows Name, Section, Status, GSTR-1 Header, Original Period, Original Number, Revised Number, Revised GSTIN, Revised Value and the five differentials.
- Numbering. Amendment names come from a document-numbering setting with the AMD series (AMD-ddmmyyyy-nnnnnn). See Templates and numbering.
- Provisioning. Keep the monthly GSTR-1 provisioning running, so that an unfiled return always exists to carry amendments.
- Mobile. Amendments are a web feature of the Tax Center; the field app has no GSTR-1 screens.
Common problems
The Amendments tab says "Amendment actions are not set up for this organisation yet."
The GSTR1 entity in your organisation does not have the amendment actions. An administrator adds them (see Configuration).
"Suggest amendments works on a filed GSTR-1 only. Until a return is filed, correct the books and process it again."
The return is not filed. Correct the document and click Process GSTR1 on this return instead; no amendment is needed.
A corrected invoice does not appear in the suggestions
The invoice's tax lines have not changed. A sales invoice's tax lines are recorded only by Post General Ledger. Post the corrected invoice again, then click Compare again. Also check that the change is outside the ₹1 tolerance.
The Accept checkbox is greyed out on a row
The row's outcome is Cancelled, Needs attention, Past deadline or Not built. These are flags only. Read the message under What changed for what to do instead.
"Row … has no difference to amend any more. Refresh the suggestions."
Your books changed between Suggest and Accept, and the document now agrees with what was filed. Click Compare again.
"Give a reason for the amendment."
Enter a reason in the dialog. It is required for Accept and for Amend a document.
"Nothing changes: the revised document is the same as the one filed."
You raised an amendment by hand without changing any field, or you typed the filed value again. Enter only the values that were wrong.
"'…' is not a valid 15-character GSTIN."
The Correct customer GSTIN you entered is not a well-formed GSTIN. Check it against the customer's registration certificate.
"B2CLA keeps the original place of supply. Amend the invoice to zero and report it afresh under the new place of supply instead."
GSTN does not allow a B2C Large invoice's place of supply to change through B2CLA. Make the correction by hand on the GST portal.
"Past the amendment deadline (the November return after the end of the financial year)."
The document's month can no longer be amended. Report any remaining correction as your tax adviser directs, on the GST portal.
The next return shows no pending banner after I accepted
Only the earliest unfiled GSTR-1 for the same GSTIN after the original month shows the banner and takes the amendment in. Open that return, or Move the amendment to the return you want.
"… the target return is for another GSTIN." or "… an amendment goes into a return after its original period (…)."
Move only into a GSTR-1 of the same GSTIN, for a month after the original one. The similar "… the target return is past the amendment deadline (…)." means the chosen month is later than the deadline return. "The target return is filed. Amendments go into a return that is not filed yet." means the chosen return is already filed.
"… is filed and cannot be changed. Amend the document again in a later return instead."
The amendment was filed with its carrying return. Run Suggest amendments again on the original return; the next amendment corrects the filed one. You see the same message ending "cannot be deleted" when you try to delete a Filed amendment from a list. The rule applies however the record is reached.
"Amendment '…' cannot be carried forward. Move it to another return from the Amendments tab, or ignore it."
Carry Forward does not apply to amendments. Use Move on the Amendments tab.
"Section '…' is an amendment and cannot be imported yet."
Pull from GSTIN reached one of GSTN's amendment sections. Nothing was imported and the existing portal rows were kept. Amendments are compared only on your books side.
An amendment I accepted disappeared after processing
Processing compared it with your books again and found that the document now agrees with what was filed, so the amendment was removed. This happens only to amendments created by Suggest amendments.
Common questions
Why can't I just process the filed month again?
A filed GSTR-1 is a record of what GSTN accepted, and other returns rely on it: GSTR-9 reads only filed GSTR-1s. Processing is therefore refused on a filed return. GST law reports a correction in a later return, in the amendment tables, with the original document's number and date. xMatix follows the same path: the later return carries the amendment, the original stays as filed, and only the differential changes the later month's liability and its GSTR-3B.
Does xMatix send amendments to GSTN?
No. Save to GSTN sends the return's own tables and leaves the amendment tables out. Before you file, enter each amendment on the GST portal under 9A, 9C or 10, using the revised details on the Amendments tab and the amended amount and differential lines on the Overview. Pull from GSTIN does not import GSTN's amendment sections either, so on the Reconciliations tab every amendment reads Missing in GSTN.
Should I use a credit note or an amendment?
If you charged too much on an invoice and the customer gets a credit, a credit note in the current month is the usual route. It is reported in that month's Table 9B and needs no amendment. Use an amendment when the filed document itself was wrong: the wrong rate, date, number, place of supply, customer GSTIN or shipping bill. A note on an invoice does not change the invoice's tax lines, so Suggest amendments does not flag it.
What happens if I correct a document again after its amendment was filed?
Suggest amendments compares your books with the latest filed version of the document, which is now the filed amendment. A second difference becomes a new amendment of that amendment, carried by the next open return. The first amendment stays Filed and unchanged.
Is interest worked out on a late increase?
GSTR-3B shows an estimate of interest on the positive differentials of the GSTR-1 amendments it adds. The estimate is shown only, and nothing is posted to your books. See GSTR-3B.
Related topics
- GSTR-1: preparing the outward-supplies return: processing, reconciliation and filing.
- GSTR-3B: where the amendment differentials reach Table 3.1.
- Tax transactions: the tax lines the comparison reads.
- The GST console: opening the return and provisioning the next month.
- Annual returns: GSTR-9 reads filed GSTR-1s.
- GSTR1 entity reference
